-10%

* Images are for illustration purposes only

Nikon WR-1 Wireless Remote Controller Transceiver for Nikon DF, D5300, D5200, D5100, D3300, D3200, D3100, D7100, D7000

Availability: In stock

Normal Price: RM1,858.00

RM1,665.00

Before delivery and GST charges


✓ Comes with Full Manufacturer Warranty


Delivery Weight : 2.0 kg


Nikon

Delivery in 4-6 Working Days
12H Urgent Delivery Available

Pay with Online Banking or ATM/Cash Deposit & Enjoy Extra 2% Off

Any questions? Call us 03- 6186 6898 Operation Hours : 9am - 6pm

You may also be interested in the following product(s)

Sandisk Extreme 32GB SDHC UHS-1 45MB/s

Sandisk Extreme 32GB SDHC UHS-1 45MB/s

Normal Price: RM449.00

RM135.00

Joby GorillaPod SLR-Zoom with Ballhead

Joby GorillaPod SLR-Zoom with Ballhead

Normal Price: RM367.00

RM325.00

Lenspen Optical Lens Cleaner Original LP-1

Lenspen Optical Lens Cleaner Original LP-1

Normal Price: RM79.00

RM25.00

In The Box

Nikon WR-1 Wireless Remote Controller Transceiver

Compatible for Nikon D600, D700, D800, D300s, D200, D300, D5000, D5100, D5200, D5300, D3100, D3200, D3300, D7000, D7100 & Nikon DF

Compatible for Nikon D90, D3s, D3x, D4, D2xs, D3, D2HS , D2x

Compatible for Nikon Wireless Remote Control WR-A10, WR-R10, WR-T10, WR-R10

All Original Accessories from Nikon Malaysia


Product Features

 

Nikon WR-1 Wireless Remote Controller Transceiver

 

The WR-1 Wireless Remote Controller is part of the Nikon Wireless Remote Control system, which uses radio frequencies to communicate instead of infrared signal which requires direct line of sight, extending the capabilities and reach possible when photographers need the ability to control cameras remotely. The WR-1 Wireless Remote Controller can act as either a transmitter or receiver unit; and is compatible with the WR-T10 transmitters and WR-R10 transceivers. The WR-1 is compatible with the WR-T10 & R10 as long as the WR-1 is set to Group A, as the WR-R10/WR-T10 system is fixed on Group A.
Up to 20 WR-1 units can be used at one time (including 3 transmitters).
The WR-1 also can access up to four groups (A, B, C, D), to further separate out groups of cameras that need to be controlled independently and simultaneously.
Useful for triggering the shutter remotely when using slower shutter speeds (up to 60 minutes) for long exposure photography, to prevent camera movement as well as when shooting interval timer photography.
Range (line of sight) from a WR-1 to another WR-1 is approx. 394 ft.
When connected to a camera as a transceiver, the WR-1 must be connected to the D-SLR using either an MC-37 or MC-38 cable.
When connected to a D7100 D-SLR, the photographer can view and change camera settings remotely on the camera using the LCD information display on the WR-1.
 
Photographers can use the WR-1 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 and/or WR-1 units attached and have been paired with it. Likewise, the WR-1 can be used as a transceiver, to be controlled by a WR-T10 that is paired with it. The WR-1 is compatible with the WR-T10 & R10 as long as the WR-1 is set to Group A as the WR-R10/WR-T10 system is fixed on Group A.
The WR-1 has access to 15 radio frequency channels (1-15), to prevent interference when multiple pairings or photographers are shooting in one location. Using the WR-1 display, you can even visualize the traffic in each of the 15 channels and select the one with the least amount of traffic to minimize interference.
The WR-1 can be designated as a “master” and control the shutters of up to 20 WR-1 units, or 64 WR-R10 units. The WR-1 is compatible with the WR-T10 & R10 as long as the WR-1 is set to Group A as the WR-R10/WR-T10 system is fixed on Group A.
When using the release delay mode on the WR-1 transceiver, different delays can be used for different receivers, allowing the shutter release to be staggered over a series of cameras using a single transmitter.
When using a WR-1 as a transmitter and another as a transceiver, a third WR-1 unit can be used as a relay unit to effectively double the distance (line of sight) to the same 394 ft between units.
When connected to a D4, D800/D800E, D600, D5200 or D7100 D-SLR, the Fn button on the WR-1 has full control of the features that the camera’s Fn button controls.
Comes with a soft case, MC-37 Connecting Cord (for ten-pin remote terminals) and MC-38 Connecting Cord (for accessory terminals).

 


Product Specification

  

Nikon WR-1 Wireless Remote Controller Transceiver

 

 
 
Range Up to 394' (120 m)
Channels 15
Radio Frequency 2.4 GHz

Write Your Own Review

You're reviewing: Nikon WR-1 Wireless Remote Controller Transceiver for Nikon DF, D5300, D5200, D5100, D3300, D3200, D3100, D7100, D7000

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rate This Product

Tags

Use spaces to separate tags. Use single quotes (') for phrases.